2022 Tundra Bed Noise (Solved) (2024)

More than likely. I’ve been offered above what I paid trade value and discount on incoming gen 3 pilot

Weird my passenger side is solid. Not a squeak.
In fact if I push the passenger side it just makes the drivers side squeak

This is what I ordered. I have not tested them yet but they should arrive tomorrow.

https://www.mcmaster.com/91545A490/

in my case my dealer said it’s normal because all tundras they test make the noise so I got nothing fixed, 3 times and nothing they can do.

so I did it my self similar to what has been posted here, I added rubber washers from ace and it’s better now not completely gone but I can now drive with the rear window down.

Before i did the rubber washer anytime I had weight in the bed I couldn’t hear the noises this was from hauling hay and wood shavings for the goats and that was a good 200lbs of stuff.

The McMaster washers OD wasn’t large enough. I didn’t think to measure the ID of the tube that the bolt goes through and it was just small enough to fall right into that space. I went to Lowes and grabbed these nylon waters which fit perfect. Ran a couple of days with no issues or sounds.

Did this today as well as the o-ring for the tailgate cables. No more bed rattles! Thanks @4wd TRD PRO & @bsulli91.

Between the frame mounts and the bottom of the bed crossmember.

Did you get any responses to this issue? I have this same issue with my 2023 Platinum. It's so annoying and shouldn't be normal at all for as much as we paid for these trucks. Window is awesome how it rolls down but I doubt I will use much if not resolved. Thanks

I guess that's a likely possibility and something I will have to check on. I am assuming it's the window because it sure sounds like the window but may not be. Thanks

Yes, took it to the dealership with the OP instructions.

Test drive with tech, he confirms noise. It's from the bed area... Rattling over bumps.

They supposedly tried to check everything but didn't find any issues, don't want to follow OP instructions as it's not what Toyota tells them to do. Supposedly opened ticket with Toyota regarding this.

And they scratched my truck at dealership while at it, so it's in their body shop now...

My truck took one for the team

I'm sorry you had to take one for the team for nothing. I hope you weren't as calm when it happened as you seem now.

I used this between the frame and the bed and also under the bolts washer, noise is gone for the 6 months since I did it.

https://www.homedepot.com/p/Everbil...Anti-Skid-Surface-Pads-8-Pack-49970/203661152

It’s pretty easy you need someone to help you lift the bed.

Remove all bolts from the bed them crawl underneath and have the person helping you to lift the bed like about 1” then place the pads between the frame and the bed do one by one, you don’t have to make holes on the pads they are soft and the bolt can be pushed through.

I also added the same pads to the bottom of the bolts washer.

I have a recent build also, 2023, this may have been Toyotas fix and was applied to new models, ill check mine, its dead nuts silent