No Fail Fudge Recipe (2024)

FAQs

Why does fudge fail? ›

Homemade Fudge Doesn't Always Set

If your fudge doesn't firm up after a few hours, you either have too high an amount of liquid to sugar, or your mixture hasn't reached the soft-ball stage. Using a candy thermometer can help home cooks avoid this problem.

To fix it, you can reheat the fudge mixture over low heat and continue cooking until it reaches the proper temperature. Be sure to use a candy thermometer to monitor the temperature accurately. Alternatively, you can try to salvage chewy fudge by mixing it into ice cream or using it as a topping for desserts.

A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.

Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

Beating fudge when it's still over heat creates sugar crystals, aka the grittiness you feel in the fudge. Instead, wait to pick up the spoon (our Test Kitchen loves using wooden spoons) until the fudge drops to between 110 and 113°F, about 15 minutes.

It is also important to prevent stray sugar crystals from "seeding" your mixture and bringing crystals out of your supersaturated solution prematurely and creating a grainy fudge - people usually control for this in one of three ways: by buttering the sides of the cooking pan, by briefly covering the boiling mixture so ...

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

Technically, “fudge” is simply cooked sugar. Cook your sugar a few degrees higher and your product will likely be a bit firmer.

What consistency should fudge be before it sets? ›

You know it's ready when a small amount of the mixture dropped into a glass of cold water sets into a soft ball that you can lift out with a teaspoon and pinch between your fingers. Turn off the heat and keep stirring for 5 minutes or until the mix starts to thicken a little.

depending on the batch size, speed of the mixer and temperature in your kitchen. Pour the fudge into the baking pan/mold. I let it set for just a minute or two and then cover it with another layer of plastic wrap to touch so it doesn't form a skin while setting.

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

Conversely, if the cooking time is too brief and there is not enough evaporation, too much water will remain and the fudge will be too soft. A temperature of 112°C to 114°C (234°F to 237°F) must be maintained. This will ensure the fudge has the ideal concentration of water and sugar. Fudge is difficult to make.

The soft ball stage is the point when melted sugar is 236 degrees. Without a candy thermometer, you can achieve this with what is called a “cold water method”. Fill a small glass with ice and cover it with water until it is ice cold.. Drop your hot sugar syrup into the ice water.

OPTION 4) If you think the reason it didn't set was because you didn't heat it to the right temperature, you could try putting it back into the pan and re-cooking.

If you didn't reach the correct temperature during the cooking process, it might not set properly. Use a candy thermometer to ensure that you reach the recommended temperature. Overcooking or Undercooking:Solution: Cooking the fudge for too long or too short a time can affect its texture.

It could even be because the fudge wasn't beaten long or hard enough. If you are using an electric whisk instead of hand beating your Homemade Fudge it's important to remember that this is a very easy way to overbeat Fudge.